Progress of the lesson:
And from hunger - bark. ( Hare )
- Today we will make a hare. Winter has come and snow has fallen. Guys, what color will we make the hare? (White)
— Why is the hare white in winter ? (This is camouflage. On white snow, a white hare is hardly noticeable .)
1. Take a white thin sheet and fold it in half. On one half we measure three narrow strips 1.5 cm wide, and leave the other half whole . Cut along the lines. Cut out two short strips of pink paper blanks for the ears .
2. half of a white sheet in half and cut into two wide strips .
3. Bend strip We got two wide strips of different lengths .
two cylinders from wide , and from the cut off part we make a ring - this is the tail.
5. Glue two large cylinders into the number 8.
6. Take narrow strips : glue droplets from two narrow strips , and cut the third strip in half .
7. Glue rings from two short strips and glue pink ears onto white droplets - “ears”
.
8. Glue the ears, paws, and tail to the hare. Eyes, mustache, nose can be drawn.
9. The hare is ready ! You can finish the front legs.
Christmas balls made of stripes. Master class You can make a huge number of different crafts from paper strips. I bring to your attention a New Year's resolution: Making a ball. Children's - master class "Flower Glade" on 3D applique from paper strips of colored paper Good day, dear friends and colleagues. I bring to your attention a children's master class on making compositions using. Children's master class on making crafts from paper rolls “Hare” Children of any age love to be creative. And you can make your own crafts not only from materials purchased in the store. Master class “The Scarlet Flower”. Volumetric applique from paper strips of colored paper Master class: Volumetric applique from paper strips of colored paper “Scarlet Flower” Author: Yulia Vladimirovna Fedoseeva Age:. Master class “Toys from paper strips” for children of primary school age Goal: to make toys from paper strips. Objectives: Educational -Introduce the technology of making toys from stripes -Teach how to mark. Master class "Crab". Construction from paper strips for the lexical topic “Sea inhabitants” Today we will go to the seabed to visit a crab that prefers to hide from people. This amazing creature is. Master class on applique “Hedgehog” from paper strips for children 5–6 years old Theme of the application: “Hedgehog”. Master class for children of senior preschool age. Application is modeling on a plane. Application.
Funny face
Perhaps the easiest origami hare model for children and beginners. The muzzle is good both for decorating a postcard and as an independent souvenir. The model is worth adopting for primary school teachers - it is so simple that it is suitable for independent work without the help of adults.
The muzzle should be as bright as possible to really lift the mood and look impressive. If you don’t have colorful “kami” paper on hand, you can color ordinary landscape sheets at your discretion or download the print you like.
Step-by-step instruction:
- We draw a hare's face in the upper half of the square, and on the strip in the central part - the pink part of the ears.
- If desired, color with a stamp, pastels, paints or pencils. If necessary, let the workpiece dry completely and cut it out.
- Fold from bottom to top diagonally.
- We tuck the workpiece along the line of the “ears”.
- We bend it “valley” along the central axis. The face pattern should be on the outside.
- We open the workpiece.
- Raise the right and left corners to the top of the triangle.
- Fold up the bottom.
We do the same with the top corner.
Origami hare faces are ready:
Bunny made of paper circles: three-dimensional paper bunny step by step
Volumetric bunny made of paper circles. Step-by-step review for children with photos. A simple paper hare for children's creativity.
For work you will need the following materials:
- Blue paper and cardboard;
- White paper;
- Plastic moving eyes;
- Black felt-tip pen, compass, scissors, glue.
Summary of the lesson on designing “Circus animals from cylinders”
Maria Smirnova
Summary of the lesson on designing “Circus animals from cylinders”
• Continue introducing children to paper sculpture techniques. Show the rich possibilities of combining planar and volumetric curvilinear ( cylindrical ) design
elements.
• Introduce children to the method of twisting a rectangle into a cylinder .
• Formation in children of the ability to analyze samples of structures , highlighting a familiar method of design , and independently use the mastered methods to create new, more complex structures .
Preliminary work: looking at illustrations, postcards with pictures of animals , reading poems and stories about animals and the circus .
Material: the hall is decorated with balloons, music.
The teacher creates an object-based play environment on the screen: flat figures of a gnome, a house, a pond, a clearing, an oak tree, a fir tree, a forest, mushrooms, and pets . Figures of circus animals , made on the basis of a cylinder : a frog, a bear, a hare. The following material is prepared for each child: a rectangular sheet of paper of different colors (7cm*14cm, 2 rectangular strips (11cm*3cm, animal , glue, pencil, scissors, glue brush, stand for brushes, napkins, oilcloth. Magician's costume (cape, hat, chest and “magic”
stick. For the teacher: a rectangular sheet of paper, a paper
cylinder , strips of paper, scissors.
Bunny made of paper circles step by step
Making the torso
For the body, cut out 6 blue and 2 white circles. Of course, colors and their combinations can be absolutely any. If the bunny is dedicated to Easter, then it can be of all pastel colors, even pink.
Fold the circles in half. The straighter you fold it, the more correct and stable your torso will be.
Glue the circles into one whole, fastening along one side.
You will get this ball-body of a hare.
Cut out a long figure eight from cardboard. These will be the bunny’s paws, and also a support, thanks to which the craft will take a stable vertical state and will not fall to one side.
Glue the paws on the bottom. It is safer to use PVA glue.
bunny head
The head in this craft is flat, in contrast to the voluminous body. Cut out for her:
- Circle made of blue cardboard;
- Blue ears and white additions to them;
- White teeth.
You can also prepare the paws at this stage.
Glue ears, eyes, nose, teeth, draw a muzzle. The head is ready.
Attach it to the body, placing it between the glued parts. For stability, apply a little glue first. If the head does not fit into the desired area, cut there with scissors. Alternatively, you can make an accordion neck and glue the head to it. Also glue on the sides of the paws.
Source
Usagi Tsukino
In the east in general and in Japan in particular, hares are treated with great respect. Shy animals are endowed with outstanding military qualities - nobility, courage, intelligence and sacrifice. According to legend, Buddha once took on the form of a weak old man and turned to animals with a request to feed him. The hare did not have a suitable treat, but he found a way out - he roasted himself. Touched by such self-sacrifice, Buddha settled the animal on the moon, thus giving it immortality.
Many peoples of the world have similar legends. Scientists believe that poetic metaphors are caused by the location of spots on the night light, in which one can see a big-eared figure bending over some kind of container. In Japanese cosmogony, this is the Moon Hare (Usagi Tsukino), who grinds rice for mochi cakes in a mortar with a special pestle. Authentic Japanese delicacies were originally prepared as sacrificial offerings to the gods and are still an important part of Shinto rituals.
In autumn, it’s time to admire the full moon, and with it, contemplate Usagi, always busy with his rice. The Japanese thank the night star and its faithful servant for the generous harvest, and sing it in poetry and music. But the divine hare is even more popular on New Year’s Eve, when Japanese housewives prepare mochi themselves - the main delicacy of the festive table. At the same time, they believe that they are like Usagi Tsukino, who sends good luck and happiness to his fans.
The Japanese also love the “earthly incarnation” of the Moon Hare – rabbits. In large cities there are analogues of cat cafes, only in them customers can expect long-eared pets. They perform the same functions as cats, allowing visitors to cuddle, treat and pet them. Regulars of “rabbit cafes” are sure that the four-legged “staff” are great at relieving stress and promoting relaxation. And hugs with a rodent are very inexpensive - only $1.
Easy option
Simply roll a couple of balls of different sizes to get the body and head of a bunny.
It is necessary to show this to the child so that he understands the essence of the process.
Then four small cylinders are rolled out to serve as the feet. After this, the nose and ears are done.
The whole thing is secured with black dots that will serve as eyes, and the craft is ready. However, this is not enough.
To make a greater impression, you need to create an environment for it, besides, the small size allows you to include more details that will not require much effort and time. This way you can make a small house nearby, or a whole family of hares.
Beautiful paper bunny
Things are completely different if you need a medium-sized craft. Plasticine in such quantities is very heavy and quite expensive, so you need to use other materials. And the best material in this matter is paper or cardboard. From these 2 components you can make virtually anything. The main thing is to draw the scans correctly, or find ready-made ones on the Internet and print them out.
You should take into account the fact that just a hare will look quite ordinary against the background of other crafts, it will not stand out. Therefore, it is necessary to include something special in the design.
In order to glue a hare out of paper, in the easiest way, you only need to twist a cylinder, and then stick on it a pair of beautifully cut and painted eyes, and then ears with paws. And that’s it, the easy craft is ready. You can add some small detail, in the form of a carrot. However, to make the craft more detailed and beautiful, you will need to try.
Three-dimensional figurine
At the very beginning, you need to carefully cut out the scans from the paper. After that, fold them sequentially, glue them with glue, and leave to dry.
While the main part of the figure is drying, you can proceed to the remaining parts. Next, the bunny’s paws and ears are cut out and glued together. By that time, the main part of the figure will already be dry, and the remaining parts can be glued onto it.
